|
DSCN2070
Here's a shot of the shell taking shape and standing tall.
Date: 12/31/1969
Owner: Jim Husted
Views: 4911
|
DSCN2103
I did a dry fit of the shaft yesterday.
Date: 12/31/1969
Owner: Jim Husted
Views: 4112
|
DSCN2104
Shows the length with the slipyoke about an inch shy of full insertion.
Date: 12/31/1969
Owner: Jim Husted
Views: 3416
|
|
DSCN2105
This measurement is from the end plate face and doesn't include the tail shaft. By creating an adaptor plate I use a larger bearing and also a mount for the tranny end slip yoke support.
Date: 12/31/1969
Owner: Jim Husted
Views: 4101
|
DSCN2106
Front end view showing the tailshaft. I'll be making an extended arm to attach a Zilla speed sensor while being able to use the tailshaft.
Date: 12/31/1969
Owner: Jim Husted
Views: 3892
|
DSCN2107
Here's a shot of the nifty mounting bracket attached to the motor with 3 bolts. Anyway, there's a pair of these about to be born 8^) Still got some stuff to do and address, but all cake from here.
Date: 12/31/1969
Owner: Jim Husted
Views: 4479
|
|
DSCN2378
Her she is completed. It's taken me much longer than I had anticipated, as it's had a couple design changes. Adding a rear motor oil seal so the tranny end can bathe in 90 weight instead of having to grease the slip yoke bushing every so often. Mike Wi
Date: 12/31/1969
Owner: Jim Husted
Views: 3356
|
DSCN2379
Commutator end (CE)
Date: 12/31/1969
Owner: Jim Husted
Views: 3272
|
DSCN2380
Drive end (DE) before tranny end was attached (and without the oil seal modification.
Date: 12/31/1969
Owner: Jim Husted
Views: 3324
|
